• FPGA
• real time simulation
• motor control
• PMSM

FPGAs can integrate on a single device high speed/high accuracy motor and power control. To demonstrate a motor control design target control device and motor kit are needed. The presented project describes how the use of FPGAs can go further and include not only the control design, but also a real time model of the motor kit used to test it. This will lead to the reduction of costs and supply issues related to the physical motor kit.
Several steps has been followed to create the simulation. First one was software only. A C function replicating the behaviour of a permanent magnet synchronous motor (PMSM) runs real time on the embedded processor. Then the software algorithm was converted to a IP using Simulink libraries. The IP is programmed on the FPGA fabric, but is directly called by software using the Avalon Memory-Mapped interface. The IP is in single floating point precision, this has the advantage to be easier to design, but the drawbacks of long execution time and high resource usage. In order to create an IP able to run fast enough (MHz) the third step consisted in converting the floating point model to fixed point precision. This required a careful numerical design to maintain accuracy, keep the resource usage down and provide a faster execution.