Thesis etd-06052017-111659 |
Link copiato negli appunti
Thesis type
Tesi di laurea magistrale
URN
etd-06052017-111659
Thesis title
Development, Testing and FE-Simulation of Adhesively Bonded Overlapping Tube Specimen
Department
INGEGNERIA CIVILE E INDUSTRIALE
Course of study
INGEGNERIA MECCANICA
Supervisors
.
relatore Prof. Frendo, Francesco
relatore Prof. Bertini, Leonardo
relatore Ing. Baumgartner, Jorg
relatore Prof. Bertini, Leonardo
relatore Ing. Baumgartner, Jorg
Keywords
- bonded
- joint
- tube
Graduation session start date
12/07/2017
Availability
Full
Abstract (Inglese)
Abstract (Italiano)
Designing a tube specimen with an overlapping area in which the adhesive is applied. This geometry creates a challenge to get reproducible connections between the steel and the adhesive on the complete circumference.
In order to achieve a valid test specimen, the specimen geometry together with the positioning device and the application of the adhesive have to be considered, designed and planed.
A finite-element model of the specimen will be created to verify the design and the test results.
After the construction of the positioning device, specimens will be produced (manufacturing of tubes, application of the adhesive, curing in oven) in the developed application process and tested.
In order to achieve a valid test specimen, the specimen geometry together with the positioning device and the application of the adhesive have to be considered, designed and planed.
A finite-element model of the specimen will be created to verify the design and the test results.
After the construction of the positioning device, specimens will be produced (manufacturing of tubes, application of the adhesive, curing in oven) in the developed application process and tested.
File
| Nome file | Dimensione |
|---|---|
| Thesis.pdf | 13.22 Mb |
Contatta l’autore |
|